Машина була продана і більше не знаходиться у пропозиції. Контактні дані не можуть бути надані.

Joskin TETRALINER 26000 L Топ пропозиція

Dealer number HAR2371677
Марка Joskin
Модель TETRALINER 26000 L
Рік виробництва 2019
Додаткова інформація
Тип машини: Нова машина
Марка: Joskin
Модель: TETRALINER 26000 L
Рік виробництва: 2019

Детально

Joskin liquid manure barrel
Type "Germany" with vacuum pump
Wheels 560/60 R 22.5 Mitas 161 D TL AR-02
(Ø 1.248 x 546 mm, 5.735 kg per wheel with
40 km/h)
ALB on level indicator with float
rear working lights LED
front position lamps (4 light sources) and
side lights with LED bulbs
Pump type PN 155 JUROP (15.500 l/min)
ECOPUMP: Silencer with large volume
Oil separator and increased air supply -
Noise reduction included
One-sided wide-angle drive shaft
(Walterscheid)
Level indicator with float instead of
standard sight glass
Level indicator Ø 6" (150 mm)
(Plexiglas viewing tube) instead of
standard sight glass
Suction slide Ø 6" (150 mm) with
swivelling clamp jaw, type Perrot
Preparation for hydraulic agitator
Preparation for FrontJUMBO without installation
Ø 200 mm or for lateral JUMBO
suction arm
Preparation for hydraulic filling dome
500 x 600 mm - incl. preparation
for inner and outer conductors
Electro-hydraulic operation with
small flow rate - everything except
hydraulic motor
Flow diversion for turbo, agitator
or tire pressure control system
TÜV approval for 40 km/h
(without rear collision protection)
without rear slider and without distributor
Ventilation of the barrel (combined
control with injector retraction)
Universal input block with small
Flow rate Type UPD for power supply
the solenoid valves and load sensing
System (signal connector)
Pre-equipment for hopper Ø 8" (200 mm)
or unloading arm Ø 8" right
(without indentation)
Pre-equipment hopper Ø 8" (200 mm)
or unloading arm Ø 8" (200 mm) left
(without indentation)
BPW axles 150-10G with brakes 410x180mm
Connection hose left / right with
2 blind flanges Ø 8" (200 mm) at the
Pre-equipment for lateral suction
dolly-chassis incl. Ø 80 mm
3 T JOSKIN ball head (large plate),
hydraulic parking support (single acting) and axle distance
from 1,820 mm to 26000 and 28000 instead of
series. drawbar
Automatic translation from German without guarantee.
Show original description

Поділитися через

If you have any questions, comments or concerns, please call us.

02504 / 888 65 20